Line Follower Robot

Posted under Projects on Friday, 10 April 2009 by 4y133
Microcontrollor AT89C2051 and H-Bridge driver L293D were used  to control direction and speed of motor. Circuit diagram of Infrared sensors and comparators. Position of sensors,  left hand side is side view and right hand side is top view. Software Software for write to...
Line Follower Robot

Ethernet Cable – Color Coding Diagram

Posted under Tutorial on Wednesday, 8 April 2009 by 4y133
The information listed here is to assist Network Administrators in the color coding of Ethernet cables. Please be aware that modifying Ethernet cables improperly may cause loss of network connectivity. Use this information at your own risk, and insure all connectors and cables are modified in...
Ethernet Cable – Color Coding Diagram

4 Channel RF Remote Control

Posted under Projects on Tuesday, 7 April 2009 by 4y133
*already test this circuit. It work well. Figure 1. RF 4 channels remote Transmitter This is a very simple RF transmitter circuit that consists of the Holtek HT-12E encoder chip and AM 418MHZ-transmitter module (WZ-X01). Using the hybrid RF xmit/receive modules make building the RF...
4 Channel RF Remote Control

Speed up You Firefox Browser

Posted under Tips and Tricks on Monday, 6 April 2009 by 4y133
Here’s something for broadband people that will really speed Firefox up: 1.Type “about:config” into the address bar and hit return. Scroll down and look for the following entries: network.http.pipelining network.http.proxy.pipelining network.http.pipelining.maxrequests Normally...
Speed up You Firefox Browser

How to check your infra red LED

Posted under Tips and Tricks on Wednesday, 11 March 2009 by 4y133
How to check your IR Led? Only use your handphone camera to check it. Check Remote Battery - The funniest bloopers are right...
How to check your infra red LED

10 Watt Audio Amplifier

Posted under Projects on Tuesday, 10 March 2009 by 4y133

9V battery indicator

Posted under Projects on Saturday, 28 February 2009 by 4y133
This is a very simple 9V low battery indicator circuit which has 2 LEDs, one green which will light up when the battery voltage is higher than 6.9 volts and one red LED which will light up when the battery voltage is bellow 6.9 volts. You can use BC547 … BC549...
9V battery indicator

Blown Fuse Indicator

Posted under Projects on Sunday, 21 December 2008 by 4y133
Generally, when an equipment indicates no power, the cause may be just a blown fuse. Here is a circuit that shows the condition of fuse through LEDs. This compact circuit is very useful and reliable....
Blown Fuse Indicator